Artesanía, Diseño de producto
Leave a comment

PAPER TABLE & PAPER BRICK BY ARCH STUDIO

The designer has turned the waste paper pulp into solid material through solidification treatment to make its strength as plates with plasticity and has a three-dimensional curved surface. This is the original idea of this work.
 The nature of paper pulp has changed correspondingly from soft, light and thin to hard, tough and thick. Then the paper takes place of the wooden table top, with a soft form outside but solid inside. Though the same of the table is soft table, the difference between its visual impression and the inner character makes it an interesting complex, the designer redefines the nature of the product.

DXI_PAPER TABLE_05

PAPER TABLE. Designer: Li Xiao-Ming by Arch Studio. Photo: JIN Wei-Qi

DXI_PAPER TABLE_04

PAPER TABLE. Designer: Li Xiao-Ming by Arch Studio. Photo: JIN Wei-Qi

The unique feature of soft table lies in excavating the special nature of paper in order to design it for the undulating shape. Its function is defined for taking a sleep or a snooze. The curves on the table top are in accord with the curvature changes of human body engineering. It is fit for the posture when people bend over the table and it is also for normal use.
The special function of paper table does not only reflect in the appearance of its physical appearance, but the most important factor is embodied in its material particularity.

For the visual perception, paper feels gentle and natural like cotton because it is soft, but for this product, the designer makes the paper table to be solid and load-bearing after casting.
”Paper Table” Introduction: 
Materials: recycled paper pulp, maple
Size: 100 x 100 x 70cm

DXI_PAPER TABLE_06

PAPER TABLE. Designer: Li Xiao-Ming by Arch Studio. Photo: JIN Wei-Qi

DXI_PAPER TABLE_03

PAPER TABLE. Designer: Li Xiao-Ming by Arch Studio. Photo: JIN Wei-Qi

DXI_PAPER TABLE_02

PAPER BRICK. by Arch Studio. Material: recycled paper pulp. Photo: JIN Wei-Qi

“Paper Brick” (Paper, 2016)
Paper is a kind of materials with characteristics of both commonality and specialty. However, it’s a brand new challenge for paper itself to present it in a special way through solidification treatment and moulding. Therefore, the property of paper and brick is conflicted through casting, from presenting, developing to strengthening. When the paper is presented in a brick shape, it’s weak but strong, soft but hard. Constructing is like rebirth. “Constructing” means taking a chance to re-construct the recycled paper pulp, which mostly known as a waste. The waste pulp with light weight but big shape can be re-constructed into high density material, which turns to be a new building material for research.
”Paper Brick” Introduction
Materials: recycled paper pulp
Type: Porous paper brick
Size: 42X21X7cm

Technology: casting
Basic Property: density on surface, medium weight, high compressive strength (10-30MPa), medium strength of extension (1-3MPa), medium breaking strength (2-4MPa)
Characteristics: load-bearing, easy bricklaying, waterproof, environmental protection, available indoor and outdoor.

DXI_PAPER TABLE_01

PAPER BRICK. by Arch Studio. Material: recycled paper pulp. Photo: JIN Wei-Qi

Deja un comentario